Skating Technique: turns - Forward Outside 3-Turns

turns - part 2.

Disclaimer: this is my understanding of the technique and my experience in learning skating, could be not the correct one...

The Forward 3-Turns allows you to go from skating forward to skating backward without changing feet, so you stay on the same foot. It is called a 3-turn because it make a mark on ice resembling the figure three. As I was saying in the previous post about the Forward Inside Mohawk, it is not an easy skill. I actually don't find it a beginner's skill. At this level you get the idea, and you do it better and better as you progress.

When I learned these in my group class, the only instruction I remember I was given, was:
- to go on an arch (lobe), so outside edge turned at the top of the lobe into an inside edge,
- start with the opposite hand than foot in front,
- twist the shoulders towards the inside of the circle
- turn on the ball of the foot
- twist the shoulders back (to check)
And it was demonstrated. I was saying before, the group classes were more "monkey see, monkey does"... While I understand that beginners can be overwhelmed by too much instruction I wish I knew a little more. Like:
- to keep my weight on my skating hip (that usually translates to me in don't drop the free hip)
- twist your shoulders is actually twist your upper body (from the waist up, so the core, rib cage and shoulders) while engaging the core and keeping the upper body connected with the hips. I had a breakthrough when I was told bring the hips around too, but it may be a correction just for me because I have open hips, and I used to really leave the free hip back...
- you turn on the ball of your foot to lift the rest of the blade of ice so it won't scrape and stop the turn
My private coach says for 3-turns you should work on 4 things
- head (turn your head first)
- upper body (that I explained already)
- bend- rise- re bend, that is you ride the edge with the knee bent, you rise to bring your weight on your skating hip and the ball of your blade, then bend again after the turn to hold the inside edge
- AND LEAN. I mentioned the lean when I was talking about edges, and I was saying that that's more an intermediary requirement, because it wasn't mentioned to me as a beginner. But I think the beginner should be aware about the lean and start working on it

The most interesting fact that I learned about the 3-turns was that the turn is done from the skating knee. This may an intermediary level information, so as a beginner maybe ignore it...

I think this is a good time to say that, surprise!, there are different types of forward outside 3-turns...
The "figures" style 3-turn is an oldie but goldie or goodie. This would be done at slow speed in a controlled and exact manner. I don't think this is a beginner turn but maybe it should be...
And here is a link to an old book I found online. Do notice that what they call spirals are actually edges: http://iceskatingresources.org/Chapter3FO3Turns.html
This 3-turn relies in the understanding of edges done using the lean. And the free foot is kept at the back of the skating foot (in a T-position) and the free hip hold back (that I was saying I was corrected to not hold back... as a beginner). The foot and hip in this position help to hold the back inside edge, more precisely to do not over rotate it after the turn. And the turn is done by shoulder rotation, leaning and turning on the ball of your blade while being align on your skating hip. They also mention to press into the ice. That would be bend-rise-bend that happens a lot in skating.
The Freestyle 3-turn (before jumps or spins) is faster, straighter and with the free leg extended.
Ice Dancing 3-turns that I know are the dropped 3-turn and the American Waltz 3-turn. They are exact, compact so the partners can do them together, they have a very specific count and they are very pretty :)
The MITF 3-turns are a little bit of everything. Plus each level of testing asks for the 3-turn to be put in a different combination. One of the skills in the first test (Pre-Preliminary) is the "waltz eight", and while there is no specific requirement about the 3-turn, is customary to be done with the free foot extended on the exit edge, to look waltzy... I think this is the easiest, the beginner, waltz eight 3-turn and goes like this:
- stroke on an outside edge from a T-position. Opposite hand is in front, the skating hand laterally-back. The skating foot is bent and the free foot is extended as long as comfortable then brought near the skating foot, laterally, not in the back. This helps keeping yourself over the skating hip. Also it brings the hip around, which ideally would be done with the core being engaged during the upper body twist, but I feel beginners don't engage the core properly.
- twist the upper body until facing the inside of the circle, the free hand should point to the center of the circle. Press into the ice with the skating foot while still bent and when you feel the twist is almost turning straighten the knee and get on the ball of your foot while still pressing into the ice. Then release the pressure into the ice to allow the foot to turn. The ball of your foot is the axis of the turn, the heel of the foot will make an arch.
- check the upper body after the turn (twist the other way so the skating hand is now in front), press into the ice again and extend the free foot back to help with the check. The skating knee should bend again to have a better inside edge. I was kind of snapping that free foot back while holding the lower back and buttocks tight, and while it helps with the check it flattens the edge... The alternative was that I couldn't hold the exit edge at all, I would have put the free foot down immediately, so while not ideal, it was helpful. I also could't bend the knee until I was stable on the edge.

The 3-turns are hard!!!